Steel Butt Welding Pipe Fittings Cap
Hoed
Materiaal: koalstofstaal, roestfrij stiel, alloy stiel
Technysk: Forged en triuwe
Ferbining: Welding
Standert: ANSI, ASME, AP15L, DIN, JIS, BS, GB
Type: 45° en 90° LR/SR Elbow, Reducers, Tee, Bends, Cap, Cross.
Muorre dikte: SCH5-SCH160 XS XXS STD
Oerflak: Black Paint / Rust-proof oalje / Hot Dipped Galvanized
Hoeken: 30/45/60/90/180°
Grutte: 1/2 "-80" / DN15-DN2000
Sertifikaat: ISO -9001:2000, API, CCS
Applikaasje: Chemical Industry, Petroleum Industry, Construction Industry en Other
Ynspeksje: Ynspeksje fan 'e fabryk of de ynspeksje fan tredden
Ferpakking: Triplex pallets / houten koffer of neffens jo spesifikaasje
ASME B16.9, B16.28
| Pipe Grutte | Alle fittings | 90 & 45 Elbows and Tees | Reducers en Lap Joint Stub eintsjes | Haadletters | |||||||
|
| Buitendiameter by Bevel, D (1) | Binnendiameter by ein (1) | Muorredikte t | Center-to-End Ofmjittings A, B, C, M | Totale lingte, F, H |
| |||||
|
|
|
|
|
|
| Totale lingte, E | |||||
|
|
|
|
|
|
|
| |||||
|
| IN | MM | IN | MM |
| IN | MM | IN | MM | IN | MM |
| ½ ~ 2½ | +0.06 | +1,6 | ±0.03 | ±0,8 | Net minder dan 87,5% fan nominale dikte | ±0.06 | ±2 | ±0.06 | ±2 | ±0.12 | ±3 |
|
| -0.03 | -0.8 |
|
|
|
|
|
|
|
|
|
| 3 ~ 2½ | ±0.06 | ±1,6 | ±0.06 | ±1,6 |
|
|
|
|
|
|
|
| 4 |
|
|
|
|
|
|
|
|
|
|
|
| 5 oan8 | +0.09 | +2,4 |
|
|
|
|
|
|
| ±0.25 | ±6 |
|
| -0.06 | -1.6 |
|
|
|
|
|
|
|
|
|
| 10 ~ 18 | +0,16 | +4,0 | ±0.12 | ±3,2 |
| ±0.09 |
| ±0.09 |
|
|
|
|
| -0.12 | -3.2 |
|
|
|
|
|
|
|
|
|
| 20 ~ 24 | +0,25 -0,19 | +6,4 -4,8 | ±0.19 | ±4,8 |
|
|
|
|
|
|
|
| 26 ~ 30 |
|
|
|
|
| ±0.12 | ±3 | ±0.19 | ±5 | ±0.38 | ±10 |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 32 ~ 48 |
|
|
|
|
| ±0.19 | ±5 |
|
|
| |
| Pipe Grutte | Lap Joint Stub Ends (2) | 180 Return Bends | ||||||||||
|
| Outside Diameter of Lap, G | Lap Dikte | Fillet Radius fan Lap, R | Center-to-Center Dimension, O | Werom nei- Face Dimension, K | Oanpassing fan Einde, U | ||||||
|
|
|
|
|
|
|
| ||||||
|
|
|
|
|
|
|
| ||||||
|
| IN | MM | IN | MM | IN | MM | IN | MM | IN | MM | IN | MM |
| ½ ~ 2½ | +0 -0.03 | +0 -1 | +0.06 -0 | +1,6 -0 | +0 -0.03 | +0 -1 | ±0.25 | ±6 | ±0.25 | ±6 | ±0.03 | ±1 |
| 3 ~ 2½ |
|
|
|
|
|
|
|
|
|
|
|
|
| 4 |
|
|
|
| +0 -0.06 | +0 -2 |
|
|
|
|
|
|
| 5 oan8 |
|
|
|
|
|
|
|
|
|
|
|
|
| 10 ~ 18 | +0 -0.06 | +0 -2 | +0,12 -0 | +3,2 -0 |
|
| ±0.38 | ±10 |
|
| ±0.06 | ±2 |
| 20 ~ 24 |
|
|
|
|
|
|
|
|
|
|
| |
| Pipe Grutte | Off Angle, Q | Off Plane, P | ||
|
| IN | MM | IN | MM |
| ½ ~ 4 | ± 0,03 | ± 1 | ± 0.06 | ± 2 |
| 5 oan8 | ± 0.06 | ± 2 | ± 0.12 | ± 4 |
| 10 ~ 12 | ± 0.09 | ± 0.19 | ± 5 | |
| 14 ~ 16 | ± 3 | ± 0.25 | ± 6 | |
| 18 ~ 24 | ± 0.12 | ± 4 | ± 0.38 | ± 10 |
| 26 ~ 30 | ± 0.19 | ± 5 | ||
| 32 ~ 42 | ± 0,50 | ± 13 | ||
| 44 ~ 48 | ± 0.75 | ± 19 | ||
OPMERKINGEN:
Out-of-round is de som fan absolute wearden fan plus en minus tolerânsjes.
Bûtendiameter fan de loop sjoch de tabel op side 15.
Carbon stiel klassifikaasje
(1) Neffens it doel, koalstof stiel kin wurde ferdield yn koalstof struktureel stiel, koalstof ark stiel en frije cutting struktureel stiel.Carbon struktureel stiel kin wurde ferdield yn engineering bou stiel en masine manufacturing struktureel stiel;
(2) Neffens de smeltmetoade kin it ferdield wurde yn iepen hurdstiel en converter stiel;
(3) Neffens deoxidation metoade, it kin wurde ferdield yn siedend stiel (f), deade stiel (z), semi deade stiel (b) en spesjale deade stiel (TZ);
(4) Neffens de koalstof ynhâld, koalstof stiel kin wurde ferdield yn lege koalstof stiel (WC ≤ 0,25%) en medium koalstof stiel (WCO. 25% - 0,6%)
En hege koalstofstiel (WC> o.6%)
(5) Neffens de kwaliteit fan stiel, koalstof stiel kin wurde ferdield yn gewoane koalstof stiel (hegere fosfor en swevel), hege kwaliteit koalstof stiel (legere fosfor en swevel), heechweardich heechweardich stiel (legere fosfor en swevel) ) en spesjale kwaliteit stiel fan hege kwaliteit
